Why transform the old-fashioned air hammer and steam hammer into SSET electro-hydraulic hammer?

Forging hammer is a forging equipment which uses impact energy to produce plastic deformation of metal, and steam hammer and air hammer are driven by steam or compressed air to realize its forging function. Its low thermal efficiency, low energy consumption, serious environmental pollution, belongs to the backward elimination equipment. SSET's electro-hydraulic hammer has been continuously improved for 5 generations over more than 10 years, and our latest all-hydraulic Electrohydraulic hammer uses the integrated valve body made of integral forgings, non-tubular design, low failure rate and convenient maintenance.

Our electro-hydraulic hammer has good performance, does not change the operation habits of the old air hammer and steam hammer, and can meet the forging process requirements of the original air hammer and steam hammer, for the processes of upsetting, drawing, rolling, pre-forging and multi-station forging. It can realize heavy hit, light hit, continuous hit, suspension hammer and quick stop action at any position.  The operation method is the same as the old air hammer and the steam hammer, and the operation is more flexible and more convenient.

Transform old-fashioned air hammers and steam hammer into our electro-hydraulic hammers, customers can mainly enjoy four major benefits:

• Substantial reduction in costs.

The transformed electro-hydraulic hammer not only turns the kinetic energy consumption into the original air hammer, but also eliminates the air compressor, thus eliminating the maintenance cost of the air compressor and reducing the labor cost.

• Equipment performance has been improved.

The main manifestations are as the following aspects:

①     Transformation of the hydraulic hammer using X-type guide, high guidance accuracy, can improve the precision of forgings, reduce scrap rate.

②    The hammer rod of the electro-hydraulic hammer adopts flexible design, its life is 100% higher than that of the air hammer, and the cost of the hammer rod is lower.

③    It is conducive to personalized design, on the basis of the original hammer, The strike energy can be increased by 20%, so that the working ability of the forging hammer is improved, and the production efficiency is higher.

④    According to customer needs, usually can adopt short-range design, in the case of constant strike energy, to achieve higher strike frequency.

• More flexible and convenient to use

After the transformation, the modified electro-hydraulic hammer not only starts and stops at any time and is not limited by the air compressor, but also the maximum strike energy can be adjusted arbitrarily in a certain range. It can be realized through the man-machine interface, and even according to the working conditions, the number of motor units can be selected to put into operation, so as to make the equipment more energy-saving.

• Environmentally-friendly

Reducing noise, improving working environment and reducing environmental pollution, it is more advanced environmental protection equipment.